Here is a quick short of the build of one of the recent devices i made on the channel. I used an esp32-c6 for this and made a 3d printed circuit to make the device. This method of building a PCB is not perfect but it was nice to make and I had to be VERY careful and watch out for shorts!
ADVERTISEMENT
Comments 14
Sign in to join the conversation
Sign in
😮😢
Столько делал... И зачем это надо?
С 1й стороны идея не плохая, с грубой стороны, при папке или выпаевании элементов, пластик потечёт
Из серии - как срздать себе проблемы и мужественно их преодолеть. Таккю плату можно сделать гораздо быстрее, дешевле и надёжнее в домашних же условиях.
The only question remains to me: Why? Bling for charging
Wow really nice job. You must be smart as heck
bel
Just you can buy PCB blanks for cheap then use ferric chloride for the etchant and use toner paper for transferring the mask
Good work! Never let the intrusive toughts enter! XD
That gloves transition.
It's really interesting, specially the 3D printed PCB. Good job.
Ten minutes after thi s video, AliExpress: 🤩🤩🤩
Cuál es esa display?? ❤❤❤
Hi cool