Tem um pino centralizador de centavos feito para isso, que se encaixa no eixo piloto, desse jeito ai a embreagem fica fora de centro.
D
dalton_gentry3 weeks, 4 days ago
Holy moly you learn something new everyday that’s awesome wish I seen this 50 years ago and I’m still changing clutch and pressure plates on my 55 Chevy
maríaluisa_lemus3 weeks, 4 days ago
Bueno es otra idea, que lo criticamos todo. Buen trabajo.
C
cheyenne_brown3 weeks, 4 days ago
He forgot to align it up the alignment tool to the splines
C
crystal_ramirez3 weeks, 4 days ago
El kit de clutch trae una gui para poder colocar o fijar bien el embrague
N
normamcconnell2293 weeks, 4 days ago
I lost my tool i just 3D printed a new one and it surprisingly did the job perfectly.
J
juancarlos.rolón3 weeks, 4 days ago
Welcome to the D.E.I. Mechanics. He still has to center the clutch plate. But maybe he uses special zip ties for that too.🤣🤣🤣
gabinoirizarry3903 weeks, 4 days ago
You can just put the bolts for the pressure plate into the flywheel a couple of threads then use a screwdriver to reposition the clutch plate before you tighten it. There is also an alignment tool that does this. Most of the clutch kits I've bought come with a shitty plastic one specifically for that vehicle. I guess this works too. Good stuff.
M
matthewpalmer7203 weeks, 4 days ago
But is it centered? No pilot tool was used to align the disks?
caitlin_macdonald3 weeks, 4 days ago
Très très bonnes idée bravo
J
james_west3 weeks, 5 days ago
Уже лет 10 направляйками не пользуюсь при установке сцеплений.На глаз всё четко попадает.
D
dimitrios_bonbach3 weeks, 5 days ago
très bien , pour le centrage du disque sans outils !! France
graham_harvey3 weeks, 5 days ago
lol ya never think of that part before 👊👊👊👊
D
daniel.cantu3 weeks, 5 days ago
Show parece fácil 😂😂😂😂😂
michelle_bryan3 weeks, 5 days ago
At first I was thinking hes gonna ship it back 😕
N
nadiaaether43 weeks, 5 days ago
I wouldn't trust this guy to fix a cup of coffee
J
jacqueline.long3 weeks, 5 days ago
Use an alignmemt tool or an old input shaft from a blown transmission.
R
reecehopkins4733 weeks, 5 days ago
I remember trying that once. One of the zip ties would self release. Added like 2 hrs to the sweat session in the dirt to get the plastic piece off the fingers and out of the cavity. I think this only works on "good" clutches.
El kit de clucht viene con el centrador
It looks like your first time replacing a clutch.
Tem um pino centralizador de centavos feito para isso, que se encaixa no eixo piloto, desse jeito ai a embreagem fica fora de centro.
Holy moly you learn something new everyday that’s awesome wish I seen this 50 years ago and I’m still changing clutch and pressure plates on my 55 Chevy
Bueno es otra idea, que lo criticamos todo. Buen trabajo.
He forgot to align it up the alignment tool to the splines
El kit de clutch trae una gui para poder colocar o fijar bien el embrague
I lost my tool i just 3D printed a new one and it surprisingly did the job perfectly.
Welcome to the D.E.I. Mechanics. He still has to center the clutch plate. But maybe he uses special zip ties for that too.🤣🤣🤣
You can just put the bolts for the pressure plate into the flywheel a couple of threads then use a screwdriver to reposition the clutch plate before you tighten it. There is also an alignment tool that does this. Most of the clutch kits I've bought come with a shitty plastic one specifically for that vehicle. I guess this works too. Good stuff.
But is it centered? No pilot tool was used to align the disks?
Très très bonnes idée bravo
Уже лет 10 направляйками не пользуюсь при установке сцеплений.На глаз всё четко попадает.
très bien , pour le centrage du disque sans outils !! France
lol ya never think of that part before 👊👊👊👊
Show parece fácil 😂😂😂😂😂
At first I was thinking hes gonna ship it back 😕
I wouldn't trust this guy to fix a cup of coffee
Use an alignmemt tool or an old input shaft from a blown transmission.
I remember trying that once. One of the zip ties would self release. Added like 2 hrs to the sweat session in the dirt to get the plastic piece off the fingers and out of the cavity. I think this only works on "good" clutches.