Dude swung that hammer like he was trying to win a prize at the county fair 😂😂😂
D
daniela_campos3 months, 1 week ago
Looks like you can tear up some cv axles ball joints and damage a bunch of other things
S
saravista283 months, 1 week ago
Air hammer is your best friend. Congrats on getting the bearing out, but now you need the rest of the front end.
D
daniela_campos3 months ago
The cut to the slide hammer with Lionel singing "Hello" is absolute perfection. *Golf clap*
R
ross.craig3 months, 1 week ago
That's the hub/cv axle/ball joint/dust shield buster 3k!
A
aliciabloom163 months, 1 week ago
For a second, I thought that was a trailer hitch and you were going to tow the hub out!
A
ann_lewis3 months, 1 week ago
Its all fun and games until you whack the shit out of the fender
B
beth_burton3 months ago
The cuts back to the slide hammer killed me!
M
margotgilles4323 months ago
I worked in my grandfathers mechanic shop on weekends and in the summers (ages 8 through 16) He was a Vietnam and Korean War vet as well as a drill sergeant, Army. Let’s just say he wasn’t the most patient individual. I remember on many occasions him yelling at me as I fumbled to disassemble similar car parts. I would use all manner of impact wrenches, crow bars, WD40, brake cleaner etc to accomplish tasks. The device behind you would have worked better in my humble opinion. On a related note, life has always been easier compared to those summers working on old cars in the Texas sun. Thank you grandpa for giving me the skills, discipline and “grit” to navigate this world..
Z
zoé_rousset3 months, 1 week ago
It never breaks loose with one hit where I'm from 😂
J
jamesrune243 months, 1 week ago
Old guy once showed me an easy way to put the bolt in half way, then hit the head of the bolt with an air hammer. Pops right out. I worked at a shop and I tried for a long time to get one of out of a jeep. He came over and popped it out in 10 seconds lol
V
vanessa_carlson3 months, 1 week ago
Mini sledge works just as well. This tool is also really good on rear bearings where the parking brakes are in the way.
R
ross.craig3 months, 1 week ago
I prefer the slide hammer
M
michelle.ortega3 months, 1 week ago
The down fall of using that tool. I feel the pain
M
martinemarion4313 months, 1 week ago
Yep,it’s awesome. A simple 5 pounder can do it too For stubborn wheel bearings,it’s the best!
A
amanda.matthews3 months ago
And that ladies and gentlemen is what you call out of the frying pan and Into the Fire
alexislopez2633 months ago
“I think you’re supposed to hit the square looking e-“ ….. “uhhh well it exploded”
The Control Arm Catastrophizer 😂😂😂
Aka the _”The Ball Joint Buster 3,000”_
Dude swung that hammer like he was trying to win a prize at the county fair 😂😂😂
Looks like you can tear up some cv axles ball joints and damage a bunch of other things
Air hammer is your best friend. Congrats on getting the bearing out, but now you need the rest of the front end.
The cut to the slide hammer with Lionel singing "Hello" is absolute perfection. *Golf clap*
That's the hub/cv axle/ball joint/dust shield buster 3k!
For a second, I thought that was a trailer hitch and you were going to tow the hub out!
Its all fun and games until you whack the shit out of the fender
The cuts back to the slide hammer killed me!
I worked in my grandfathers mechanic shop on weekends and in the summers (ages 8 through 16) He was a Vietnam and Korean War vet as well as a drill sergeant, Army. Let’s just say he wasn’t the most patient individual. I remember on many occasions him yelling at me as I fumbled to disassemble similar car parts. I would use all manner of impact wrenches, crow bars, WD40, brake cleaner etc to accomplish tasks. The device behind you would have worked better in my humble opinion. On a related note, life has always been easier compared to those summers working on old cars in the Texas sun. Thank you grandpa for giving me the skills, discipline and “grit” to navigate this world..
It never breaks loose with one hit where I'm from 😂
Old guy once showed me an easy way to put the bolt in half way, then hit the head of the bolt with an air hammer. Pops right out. I worked at a shop and I tried for a long time to get one of out of a jeep. He came over and popped it out in 10 seconds lol
Mini sledge works just as well. This tool is also really good on rear bearings where the parking brakes are in the way.
I prefer the slide hammer
The down fall of using that tool. I feel the pain
Yep,it’s awesome. A simple 5 pounder can do it too For stubborn wheel bearings,it’s the best!
And that ladies and gentlemen is what you call out of the frying pan and Into the Fire
“I think you’re supposed to hit the square looking e-“ ….. “uhhh well it exploded”
I used that one a Subaru and it worked well