It’s called POR 15. POR stands for paint over rust. It’s been out at least 25 years. It does something chemically to stop the rust
C
crystal_ramirez3 months, 1 week ago
Guy is holding back.. He is dying to sceam....BUT THANK-YOU FOR NOT YELLING
E
eloisa.cardenas3 months, 1 week ago
I usually skip these videos because of yelling now i watched this one😂
J
juancarlos.rolón3 months, 1 week ago
He stopt yelling😂
R
rolando_zayas3 months, 1 week ago
I work on a sea going towing vessel. When we paint we use a needle gun to remove the bulk rust then buff the area with a wire wheel, treat the area with OSPHO , apply dimetcote which is a 2 part epoxy zinc primer and then paint. That does a pretty damn good job especially considering that were constantly inundated with salt water. Id be willing to bet that if you use the same products and processes on a truck frame that it would work better than anything else.
E
elaine_fry3 months, 1 week ago
Naval jelly did the same thing and was used on boats in the Navy to convert the rust back into a paintable surface.
graham_harvey3 months, 1 week ago
It's so happy I can actually hear him
M
marie_austin3 months, 1 week ago
It used to come in spray for 20+ years ago. Was helpful
judithdrift463 months, 1 week ago
POR 15 came out in 1978 I used the media blasts autobodies and frames this was the stuff I had the most trouble getting off customers would always argue with me and say it was rust.
emmanuelle_maillot3 months ago
Thanks for passing on useful information and not yelling at us. I appreciate you
G
genaro.chavarría3 months, 1 week ago
It converts the rust to magnetite. My brother in law used to be part owner in a company that made this stuff. From what I understood, the compound somehow converted fe2o3 into fe3o4. Pretty cool.
A
agathe_prévost3 months, 1 week ago
Yea but you’re still suppose to knock the bubbles off to where all the rust is tightly on the surface of the piece and not bubbling/flaking anymore
agathe_marion3 months ago
I think my landlord has a similar paint for cracks and holes in drywall
C
cheyenne_brown3 months, 1 week ago
Idk, It just seems to good to be true.
H
hans-heinrich.segebahn3 months ago
This is the first video that I’ve seen this guy make that I can watch. Thank you for not screaming 😂
maanaszachariah603 months, 1 week ago
My like button turned into a tire lol
M
maríadelcarmenuribe8013 months ago
New...that's funny, I used this stuff 4 years ago on my truck frame. Works great too.
It’s called POR 15. POR stands for paint over rust. It’s been out at least 25 years. It does something chemically to stop the rust
Guy is holding back.. He is dying to sceam....BUT THANK-YOU FOR NOT YELLING
I usually skip these videos because of yelling now i watched this one😂
He stopt yelling😂
I work on a sea going towing vessel. When we paint we use a needle gun to remove the bulk rust then buff the area with a wire wheel, treat the area with OSPHO , apply dimetcote which is a 2 part epoxy zinc primer and then paint. That does a pretty damn good job especially considering that were constantly inundated with salt water. Id be willing to bet that if you use the same products and processes on a truck frame that it would work better than anything else.
Naval jelly did the same thing and was used on boats in the Navy to convert the rust back into a paintable surface.
It's so happy I can actually hear him
It used to come in spray for 20+ years ago. Was helpful
POR 15 came out in 1978 I used the media blasts autobodies and frames this was the stuff I had the most trouble getting off customers would always argue with me and say it was rust.
Thanks for passing on useful information and not yelling at us. I appreciate you
It converts the rust to magnetite. My brother in law used to be part owner in a company that made this stuff. From what I understood, the compound somehow converted fe2o3 into fe3o4. Pretty cool.
Yea but you’re still suppose to knock the bubbles off to where all the rust is tightly on the surface of the piece and not bubbling/flaking anymore
I think my landlord has a similar paint for cracks and holes in drywall
Idk, It just seems to good to be true.
This is the first video that I’ve seen this guy make that I can watch. Thank you for not screaming 😂
My like button turned into a tire lol
New...that's funny, I used this stuff 4 years ago on my truck frame. Works great too.
He’s so calm!!! 👀 what happened!?! 😮
Stacey David showed me this stuff 20+ years ago.
Been using that for many years