Genie garage door keypad programming #shorts

F

frédérique_weiss 3 weeks, 1 day ago

Does not work

C

cheyenne_brown 1 month ago

Excellent video! The instructions inside the cover of this opener do not tell you about using your current code to change to the new code. It only tells you about the 357. Thank you!

K

kristin.ford 1 month, 3 weeks ago

demure????

M

michelle.ortega 1 month, 4 weeks ago

Doesn’t work

lakshmiatlas43 2 months, 1 week ago

I’ve tried everything and the keypad won’t work. I’ve been the in the house for 2 years and never programmed the pad, however the openers/remotes were already programmed. I just want to be able to put the code in to lower and raise the garage doors. Any suggestions?

M

matthewpalmer720 2 months, 2 weeks ago

FOR THOSE WHO ARE WANTING MORE DETAILS THESE VIDEOS FAIL TO MENTION - here is how I got mine to work. - I followed the instructions on the key cover with no luck. - I guess that what ever failed attempts you make with the key pad will make it shut down and be sad and not want to work. Who knows. There’s a way around it tho. 1. Start from scratch. Press and hold the up/down and program key at the same time until the smaller indicator light below the program key lights off. 2. Press the learn code button on your motor box. The light needs to be PURPLE. Not blue. A flashing neon purple is what you want. Press and hold until you see that. Might take a couple times to get that purple you want. 2. Enter factory code 357 on key pad 3. Press program 4. Enter a pin u like. 5. Press program 6. Enter chosen pin 7. Press up down button and it should work. Thanks.

A

ayushman.chaudry 2 months, 3 weeks ago

This will not work 100% unless you communicate with your garage door opener

G

genaro.chavarría 3 months ago

How do you know how to block in my keypad to a new color on genie

E

elaine_fry 3 months ago

What if it still doesn’t work

J

jacqueline.long 3 months, 2 weeks ago

Nope! Didn't work!! 💩

C

christina.lewis 3 months, 2 weeks ago

Thank you so much for this, it legit took me 10 seconds. The manual makes it so confusing!

dagmarcascade31 3 months, 4 weeks ago

Thank u

B

brunamacedo633 4 months, 1 week ago

Have one and it's junk sometimes it works sometimes it dosent. Have reset it several times. Trash don't waste your money.

J

johnaura45 4 months, 2 weeks ago

New batteries, 357, then code nothing happens?

eloah_damata 4 months, 4 weeks ago

Didn't work 😢

R

rael.novaes 4 months, 4 weeks ago

Thank you!

S

sébastienraven35 5 months, 3 weeks ago

Thanks you helped me a lot we could not get it to work so how about I watch this guy to help. And turned out you did it right thanks so much

B

bryanmyst97 5 months, 4 weeks ago

When do I reprogram the box inside the garage after or before I reset my pin

R

reecehopkins473 6 months ago

Didn’t work

B

bertrand_charpentier 6 months, 2 weeks ago

this garbage won't work

Genie garage door keypad programming #shorts

Comments 57